Amplifiers & Speakers

Brooke INH 8 Passive Speaker

No matter how well speakers are made, they must deliver superb sound. These INH speakers are made from high quality plywood, rather than cheaper chipboard or MDF. Each driver is optimised for the best possible sound and efficiency then crossovers and cabinet volumes are fine-tuned to give breathtaking performance. And all this is without breaking the bank.

Product specifications

Image result for Brooke INH 8 Passive Speaker

Model No: J65533
Impedance: 8Ω
Power: 200w RMS
Frequency: 70Hz – 20KHz
Sensitivity: 93dB
SPL @ 1m: 116dB
Driver(s): 8″ Bass, 1″ Tweeter
Inputs: 2 x Neutrik Speakon®
Enclosure: Black 18mm Ply
Floor Mount: YES
Monitored: YES
Flown: YES
Wall Bracket: YES
Top Hat: YES
Weight: 14.0kg


Brooke INH-18S Passive Sub

Install ‘N’ Hire Subs meet and exceed the needs of both professional Fixed Installations and Audio Equipment Hire. Whilst lightweight & robust enough for the Hire market, INH Subwoofers offer superb audio performance that suits Installations especially well.

Product specifications

INH-18S 18 inch INH Subwoofer

Model No: J65618
Impedance: 8Ω
Power: 600w RMS
Frequency: 45Hz – 250Hz
Sensitivity: 100dB
SPL @ 1m: 116dB
Driver(s): 18″ Bass
Inputs: 2 x Neutrik Speakon®
Enclosure: Black 18mm Ply
Floor Mount: YES
Flown: NO
Wall Bracket: YES
Top Hat Satellite: YES
Weight: 43.0kg


Mackie SRM550 12inch Powered Speaker

The Mackie SRM550 active two way loudspeaker has been designed to deliver incredible audio clarity with serious volume, whilst remaining versatile and hardy to any of the punches life on the road can deliver.

Product specifications

Image result for Mackie SRM550 12inch Powered Speaker

1600W system power
12″ high-output LF driver / 1.4″ titanium dome compression driver
“Built-Like-A-Tank” all-wood, internally-braced cabinet
Rugged 18-gauge steel grille and fine-textured, sleek black cabinet finish
Front ported for maximum low-end extension and punch
High-Definition Audio Processing
Patented acoustic correction developed with touring geniuses at EAW
Precision 2-way digital crossover
Driver time alignment and phase correction
Quick one-button Speaker Mode selection for application-specific voicing (PA, DJ, Monitor and Soloist)
One button automatic feedback destroyer
Integrated 2-channel mixer featuring dual Mackie Wide-Z inputs
Handles anything from mics to guitars to mixers with a single twist of the gain knob
Includes stereo RCA inputs for easy connection to music source
Smart Protect DSP
Monitor-specific 60-degree angle and voicing mode perfect for cutting through on stage


Mackie Thump 15″ Active speaker

Thump Series loudspeakers deliver more than twice the power of the previous generation. Plus, we’ve upped the amazing amount of low end Thump delivers. High-output, more bass and they are still as affordable as ever. Featuring a built-in 3-band EQ and designed by the world’s leader in portable sound, Thump delivers power, performance and proven quality.

Product specifications

Image result for Mackie Thump 15" Active speaker

400W of ultra-efficient Fast Recovery; amplification
LF 300W peak power (Class-D)
HF 100W peak power (Class A/B)
High-output transducers
15″ high-precision woofer
1″ compression driver
Mackie Active electronics provide total system optimization
Precision 2-way crossover
Transducer time-alignment
User-adjustable 3-band contour EQ with sweepable mid-frequency
Mic/Line input for direct connection of single microphone
Tough, impact-resistant polypropylene enclosure
Pole-mountable and floor wedge-able
Extremely lightweight and portable (36 lbs)


QSC KLA12 Active Speaker

The KLA Series brings the power and sophistication of a line array system into an easy-to-use product significantly redefining the line array product category.  With its simple Lift, Click and Play approach, KLA can be deployed in a fraction of the time required by comparable line array products.  This fixed arcuate, active line array system is ideal for a wide range of portable and permanently installed applications ranging from live entertainment to houses of worship or other venues where a line array system is desired.

Product specifications

QSC KLA12 1000W 12" Powered Line Array Speaker image 1

500 W + 500 W power module
Rugged, ABS enclosure delivers light-weight durability
SOLO™ Rigging System supports deployment without tools or external hardware
Ar-Q™ Frequency Optimization quickly tunes the array with the click of a dial, adjusting for the appropriate number of boxes
10:1 design factor supports arrays of up to 480 lbs. (218 kg) 5 × KLA12 and 2 × KLA181
90° × 18° nominal coverage (requires only five boxes to configure a 90° x 90° array)
High power, 12” low frequency driver provides extension down to 44Hz without subwoofers
Extensive DSP further enhances and protects performance
1.75” diaphragm compression driver delivers clear and powerful high-frequency reproduction
powerCON® Input and Thru connections
Tilt-Direct™ pole mount assists directivity in single-unit applications


QSC KLA181 Active Sub

In addition to DEEP™ DSP algorithm, GuardRail™, Auto Standby, balanced line-level XLR input with an XLR “Thru” connector, Attenuation Control and LED indicators, the KLA181 subwoofer also includes a polarity switch.

Product specifications

Image result for QSC KLA181 Active Sub

1,000 watt power module
18″ vented subwoofer
High acoustic output (135 dB SPL peak)
Frequency range down to 33 Hz (-10 dB)
Extensive DSP further enhances and protects performance
powerCON® Input and Thru connections
Threaded pole receptacle for free-standing applications (black models only)
Suspension made possible via M10 fittings or KLA12AF Array Frame
Integrated threaded pole mount supports up to two KLA12 enclosures (black models only)


BOSE 802

The Bose 802 Series II sound components provide a fully modular system designed for high quality reinforcement of voice and music.
Bose 802 Series II loudspeakers work with the 802C Series II systems controller for active equalization of the system. The 802 Series II loudspeaker is preferred for applications requiring a rugged, portable enclosure, but can be used in permanent indoor sound system installations.
The 802C Series II systems controller assures smooth, accurate spectral response across the entire operating range of the 802 Series II loudspeaker. Sharp subsonic and ultrasonic band-limiting filters reduce power waste, stage noise, high-frequency instability, and interference. The systems controller also provides two independent signal channels.

Product specifications

Image result for BOSE 802

Frequency range 55Hz – 16kHz
Active equalization (with 802C Series II systems controller) Required
Nominal impedance 8Ω Maximum acoustic output 114dB-SPL average, 123dB-SPL peak
Power handling capacity 240W continuous pink noise, 55Hz – 16kHz
Recommended amplifier power 240W minimum, 480W maximum
Sensitivity Full-range, 91dB-SPL (1W, 1m)
Horizontal beamwidth 120
Vertical beamwidth 100° Enclosure construction Mica-reinforced polyethylene copolymer structural foam
Fusing Built-in 4-ampere quick-acting fuse (replaceable)
Insert locations Four M8 (8 mm)
Connectors Two (2) parallel-wired 1⁄4″ (6.3 mm) phone jacks and two (2) parallel-wired male XLR connectors
Dimensions 13″ (H) x 201⁄2″ (W) x 121⁄2″ (D) (33 x 52 x 32 cm)
Weight 31 lb (14 kg)


Beheringer Eurolive B215D Active Speaker

This 800-Watt 2-way loudspeaker is not only powerful but also easy to transport. At its heart lies an extremely powerful 15 long-excursion driver to deliver super-low bass coupled with a 1.75 compression driver for high-end acoustic power. Versatile trapezoidal enclosure design allows different positioning stand mounting with 35-mm pole socket or side tilt positioning for use as a floor monitor. The ergonomically shaped handles help you easily transport and set up the B215.

Product specifications

Image result for Behringer Eurolive B215D Active Speaker

550W active speaker
6.3mm jack and XLR input/looping option
15-inch speaker
frequency range: 55 to 20,000 Hz
crossover frequency: 1,900 Hz
maximum SPL: 126 dB
processor controlled equalizer
35mm stand connector
volume control
clip control
slanted side for floor monitor use
class D-amplifier
dimensions: 690 x 440 x 335 mm
weight: 20.54 kg


Portable wireless Street machine PA

Integrated iPod dock, USB slot, and SD card slot. Telescopic handle, carryhandle, and corner protectors. Tough vinyl-covered cabinet.

Product specifications

Integrated standard iPod dock, USB slot, and SD card slot. Telescopic handle, carry handle, and corner protectors. Tough vinyl-covered cabinet. Dimensions: 230mm x 220mm x 450mm
NEW Mk II model – improved (better sound, better stability, better iPod dock – standard 30 pin dock to fit most iPods, etc)
Powerful 20 watt sub woofer speaker PLUS 2 x 5 watt speakers – Use on the move with its in-built rechargeable battery pack
Microphone input socket to sing along to the music tracks, buy a wireless mic for added portability (microphones not included)
Dimensions: 230mm x 220mm x 450mm

                                                                                                                                                                                

SigNet Loop System

The Signet PDA 200/2 professional current mode audio-frequency
induction loop amplifier offers outstanding sound quality and unrivalled reliability at a competitive price. The PDA200/2 is ideal for use in small to medium size rooms up to a maximum of 200 square metres. The amplifier includes two XLR connectors- one balanced microphone input and one switchable balanced mic or line level input. Optional 11V phantom power is also available on both inputs to allow the use of electret or condenser microphones.  Ideal for churches, meeting rooms, village halls, classrooms and other applications where top quality sound is a must

Product specifications   Image result for Signet PDA 200/2 professional

Power: 230-240 V a.c. mains <150 VA IEC 320 fused mains lead supplied
Inputs: Line (3 pin XLR) – impedance: 6k8 + or – input to ground; Sensitivity: 200mV – 2.5V RMS balanced or unbalanced.
Microphones (3 pin XLR) – impedance: 6k8 + or – input to ground; Sensitivity: 1 – 8 mV balanced
Phantom power: 12V switchable (on/off)
Outreach: (Four-way Weidmuller connector BL5. 08/4) – impedance: >10k; Sensitivity: 500mV – 6V RMS balanced
Outreach Power: 16 – 21 V d.c. is available via the amplifier’s Outreach Socket.
Output type: Current mode
Loop connector: Binding posts
Recommended loop impedance: 0.5 – 1 Ohm @ 1KHz. Will drive higher impedance loops with reduced area of coverage.
Loop drive current @ 1 Ohm: PDA200/2 – 6A.
Peak loop drive current (Measured over 5mS integration time): PDA200/2 – 8 Amps @ 1 Ohm, 13Amps @ 0.5 Ohm.
Headphones: 3.5mm jack socket allows monitoring of the loop signal via >32 Ohm headphones.
Maximum area coverage (for a 400mA/M field strength +/- 1dB):
PDA200/2 @ 6A max short term current: Square room = 200m2;
Controls: On/Off switch incorporated into IEC mains inlet.
Metal compensation control. When fully anti-clockwise has no effect on the signal. When turned clockwise imparts a rising 3dB/octave characteristic to the frequency response of the amp to counteract the effect of metal in proximity to the loop.
Dimensions All models: Length – 380mm; Depth – 220mm; Height – 80mm
Weight: PDA200/2 – 3.74Kg


Motorola Radio Communications / Talk Back

Ultimate durability radios for businesses and tough conditions

Product specifications

Image result for Motorola Radio Communications / Talk Back

Metal chassis
Weatherproof (IP55 rated)
Meets Military standards
Voice announcements
Channel alias
Programmable via computer software
Privacy codes
Accelerated life testing simulating 5-years usage
Pack includes single radio, LiIon battery and swivel belt holster
Set includes 1 radio


Polycom Conference Telephone system

The SoundStation2 is Polycom’s next generation conference phone that delivers remarkable voice quality which is equal to that of the Sound Station Premier. It also provides a 50% increase in microphone pick-up and adds great new features including the convenience of connecting a cell phone, plus an LCD display for productivity enhancing applications

Product specifications

Image result for Polycom Conference Telephone system

Dimensions (WxDxH): 311 x 368 x 64 mm
Dynamic range: 94 dB
Frequency range: 300 – 3300 Hz
Input frequency: 50/60
Input voltage: 110 – 220
Operating temperature (T-T): 5 – 40 °C
Weight: 800 g

 


NEXO S1210 Tops

The compact, 2-way GEO S1210 is a scalable loudspeaker module that displays exceptional MF-LF output (103dBSPL nominal sensitivity -1W @1m) from a single12” loudspeaker and NEXO’s proprietary Directivity Phase Device (DPD). A very narrow-Q (10°) device in single-source mode, S1210’s unique Hyperboloid Reflective Wavesource (HRW) allows coupled S1210/1230s to radiate as coherent, wavefronts, yeilding precise pattern control in vertical or horizontal arrays. S12 arrays display traditional “tight-pack” pattern control in the non-coupled plane.

Product specifications

Image result for NEXO S1210 Tops

Components HF: 1 x 3” voice coil, 1.4” throat 16Ω ND driver on a 5° hyperboloid reflective wavesource. LF: 1 x 12” (30cm) high excursion neodymium 16Ω driver. Height x Width x Depth 344 x 675 x 378 mm (13 1/2” x 26 1/2” x 14 7/8”) excluding accessories Rigging axis to axis height: 345mm (13 1/2”)
Shape 10° Trapezoid
Weight net 28.05kg (61.8 lbs) including array assembly system.
Connectors 2x NL4MP SPEAKON 4-pole (In & Through) Construction Baltic Birch ply with structured black coating.
Front finish Molded Dark Grey Metal Grill.

 

 


NEXO N45 Subs GEO S1230

The compact, 2-way GEO S1230 is a scalable loudspeaker module that displays exceptional MF-LF output (103dB SPL nominal sensitivity -1W @1m) from a single12” loudspeaker and NEXO’s proprietary Directivity Phase Device (DPD). A narrow-Q (30°) device in single-source mode, S1230’s unique Hyperboloid Reflective Wavesource (HRW) allows coupled S1210/1230s to radiate as coherent, wavefronts, yeilding precise pattern control in vertical or horizontal arrays. S12 arrays display traditional “tight-pack” pattern control in the non-coupled plane.

Product specifications

Components HF: 1x 3” voice coil, 1.4” throat 16Ω driver on a 30° hyperboloid reflective wavesource
Height x Width x Depth 344 x 674 x 400 mm (13 1/2” x 26 1/2” x 15 1/2”) excluding accessories
Rigging axis to axis height: 345mm (13 1/2”)
Shape 30° Trapezoid
Weight net 26.8kg (59.1lbs) excluding accessories
Connectors 2x NL4MP SPEAKON 4-pole (In & Through)
Construction Baltic Birch ply with structured black coating
Front finish Molded dark grey metal grille
Flying points Two plates connecting with external accessories
Intercabinet angle adjustments = (16°) – 22.5° – 30°


NEXO N45 Monitor

World’s first line monitor, can be joined together into arrays to provide a scalable solution for wider coverage and higher SPLs.  Very high headroom before feedback.  Focuses coverage only where needed for lower acoustic power on stage, discreet, low profile design.  Ingenious magnetic locking system.  Non-slip base with skid system and ergonomic handle for easy repositioning on stage.

Product specifications

Components – LF 1 x 12 (30 cm) high excursion Neodymium 8O. driver.
HF 1 x 3 voice coil 1.4″ throat Neodymium 16O compression driver on a 22.5° hyperboloid reflective wavesource
Height x Width x Depth – 392 x 492 x 576 mm
Net Weight – 28 kg (62 lbs)
Connectors – 2 x NL4MP Speakon 4 pole

Image result for NEXO N45 Monitors